3D Printed Side by Side Mod

Sleek and compact is how I would describe this single 21700 SBS mod. It feels good in the hand with the curved back and slight texture to the body. The mod will hold up to 28mm atomizer flush allowing for most tanks on the market. With the Click-fet chip in this mod you get the unregulated mod feel and vape with some extra safety added. Features include low voltage cut off, reverse polarity, and 5 click lock for pocket carrying. I have also added a small LED below the fire button as a chip status light. I also use the Mod Maker Stainless steel battery tube to help make this mod almost indestructible!

Customize it:
Body Color - Choose from any of the available colors (Add color choice in notes at checkout)
510 & Fire button - Black or Stainless Steel

Click-Fet Chip Specifications:
- Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
- Operational voltage: 3.1 ± 0.1V - 4.20v
- Low voltage protection: 3.1 ± 0.1V
- Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
- Idle current: <10uA
- Timeout Protection: Yes
- Amp Limit: 46.67A (4.2v @ 0.09Ω)

Functions and LED Information
- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LED's flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LED's will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection. If the battery is around the wrong way the mod will auto fire.
- In Use: When powering the mosfet the LED will be on.